Sung Whang
Professor
Mechanical Engineering
- Phone: (718) 260-3144
- Email: swhang@duke.poly.edu
- Location: RH510
Education
Columbia University
Doctor of Engineering Science,
Columbia University
Master of Science,
Seoul National University , Korea
Bachelor of Science,
Research Interests
Mechanical properties and microstructure of nanostructured materials
Titanium alumnides
Intermetallic compounds
Processing and properties of rapidly solidified materials
Characterization of electronic materials and ceramic superconductorsJournal Articles
- “Creep and Fracture of Nanostructured Metals and Alloys,” Yin, W.M., S.H. Whang, Journal of Metals, January 2005, pp. 63-73.
- “Effect of Interstitials on Tensile Strength and Creep in Nanostructured Ni,” Yin, W.M., S.H. Whang; R. Mirshams , Acta Materialia Vol. 53 (2005) 383-392.
- “Stability and cross-slip of [101] Superdislocations in g -TiAl,” Z. Jiao and S.H. Whang, Intermetallics, Vol. 9 Nos 10-11 (2001) 891-898.
- “Stability of Ordinary Dislocations on Cross-slip Planes in g -TiAl”, Z. Jiao, S. H. Whang , M. H. Yoo, and Q. Feng, Materials science and Engineering A, (June 2002) 171-176.
- “R-Curve Characterization of the fracture toughness of nanocrystalline nickel thin sheets,” C.H. Xiao, R. Mirshams, S.H. Whang and W.M. Yin, Mat. Sci. & Eng. A., Vol. 315 (2001) 21-27.
- “The Fracture Toughness of Thin Sheet Nanocrystalline Pure and Carbon Doped Nickel,” C.H. Xiao, R.A. Mirshams, S.H. Whang and W.M. Yin, Mat. Sci. & Eng. A. Vol. 315 (2001) 21-27.
- “Creep in Boron-Doped Nanocrystalline Nickel” W.Yin and S.H. Whang, Scripta Materialia, Vol. 44 (4) (2001) 569-574.
- “Creep Behavior of Nanocrystalline Nickel at 290 and 373K,” W.M. Yin, S.H. Whang; R. Mirshams and C.H. Xiao, Mat. Sci. & Eng . A., Vol. 301, 1 (2001) 18-22.
- “Tensile Behavior and Fracture in Nickel and carbon doped Nanocrystalline Nickel,” C.H. Xiao, R. Mirshams, S.H. Whang and W.M. Yin, Mat. Sci. & Eng. A., Vol. 301, 1 (2001) 35-43.
- “Grain Growth Kinetics in NanoStructured Nickel,” M. Iordache, and S.H. Whang, Z.M. Wang, Z. Jiao, NanoStructured Materials, Vol. 11, No.8, (2000) 1343-1349.
- “Deformation of Ti-56at Al Single Crystals oriented for Single Slip by ½<110] Ordinary Dislocations,” Q. Feng and S.H. Whang, Acta Mater, 48 (2000) 4307-4321.
- “Deformation Characteristics and Dislocation Structures in Single Phase TiAl“ S. H. Whang, Q. Feng and Z.-M. Wang, Intermetallics Vol. 8 (2000) 531-537.
- "Dislocation Core Configurations of [101] superdislocations in Single Crystal Ti-56Al at 573K" Z.M. Whang, Q. Feng, S. H. Whang and L.F. Allard (Oak Ridge Nat. Lab), Intermetallics, Vol. 6, 131-139 (1998).
- "Ordering, Microstructure and Deformation Behavior in L1 0 Type FePt Compound" S.H. Whang, Q. Feng and Y. Q. Gao, Acta Met. et Mater. Nov. (1998) 6485-6495.
- "Cross-Slip and Glide Behavior of Ordinary Dislocations in Single Crystal g- Ti-56Al" Q. Feng and S.H. Whang, Intermetallics, Vol. 7(1999) 1-9.
- "Deformation under Single Slip of Ordinary Dislocation Slip in Ti-56Al" Q. Feng, Z.-M. Wang, and S.H. Whang, Mat. Sci. & Eng. A. Vol. 239 (1997) 55-62.
- "Elastic Constants and Thermal Expansion of gamma TiAl from 300k to 750k” Y. He, R.B. Schwarz, T. Darling, S.H. Whang and Z.M. Wang, Mat. Sci. & Eng. A Vol. 239(1997) 157-163.
- "Deformation and Microstructural Characteristics in Ll o Type Ti-Al-V Compounds," Y.D.Hahn and S.H. Whang, Met. and Mat. Trans. A. Vol. 26A (1), (1995) 113-131.
- “Elastic Constants of Single Crystal g-T iAl,” Y. He, R.B. Schwarz, A. Migliori and S.H. Whang, J. Mater. Res., Vol. 10, No. 5, pp.(1995) 1187-1194.
- "Rapid Solidification Processing and Microstructural Characterization of gamma TiAl-Ni Alloys" C. G. McKamey, S.H. Whang and C.T. Liu, Scripta Met., Vol. 32, No. 3, (1995) pp. 383-388.
- "Twinning in L1 o Type Fe-Pt Alloys" Y.Q. Gao and S.H. Whang, Scripta Met., Vol. 31, No. 11 (1994) 1583-1586.
- "Dislocation Loops at 800 oC in L1 o Ti 35Al 55V 10 Compound," S.H. Whang and Y.D. Hahn, Phil. Mag. A., Vol. 68, No. 1 (1993) 183-192.
- "Planar Defects in {113} Planes of L1 o Type TiAl - Their Structures and Energies ," Z.C. Li and S.H. Whang, Phil. Mag. A., Vol. 68, No. 1(1993) 169-192.
- “Fabrication and Damping Capacity in Cu-Zn-Al Matrix Composites Reinforced By Power metallurgy route”, Kisoo Shin, C.R. Wong, and S.H. Whang, Mat. Sci. & Eng. Vol. 165 (1993) 35-43.
- "Planar Defect Energies by EAM and Dissociated Superdislocation Configurations in L1 o type TiAl Compounds" Z.C. Li and S.H. Whang, Phil. Mag. A, No. 1 (1993) pp.18-25.
- "Dissociation of Superdislocations in Single Crystal L1 o Ti-Al-V Compound" Z.X. Li and S.H. Whang, Mat. Sci. & Eng., Vol. A152 (1992) pp.182-88.
- "New Gamma TiAl Alloys Containing Ni" S.H. Whang, J.Y. Kim, G.C. Chen and Z.X. LI, Scripta Metallurgica et Materialia, Vol. 26, No. 6 (Sept.) (1992) 699-704.
- "Dislocations Structure in Phase Grains of Ti 55Al 45 Alloy," J.Y. Kim, Y.D. Hahn and S.H. Whang, Scripta Met., Vol. 25 (1991) 543-548.
- "Decomposition of Superdislocations via Interaction With Ordinary Dislocations in Titanium Aluminides" Z.X. Li, J.Y. Kim and S.H. Whang, Scripta Met., Vol. 25, No. 11 (1991).
- "Dislocations Structure in Phase Grains of Ti 55Al 45 Alloy," J.Y. Kim, Y.D. Hahn and S.H. Whang, Scripta Met., Vol. 25 (1991) 543-548.
- "Flux Pinning Effect in Y-123 Compounds Containing Si," S.H. Whang, Z.X. Li and D.X. Pang, Physica C, Vol. 168 (1990) 185-88.
- "Occurrence of Glass Phases in the Sc-Co and Sc-Ni Systems," D.R. Vujic, D.A. Lohmeier and S.H. Whang, International Journal of Rapid Solidification, Vol. 5 (1990) 277-296.
- "Grain Refinement in Rapidly Solidified W-Si Alloys," S.U. Kim and S.H. Whang, J. Mat. Sci., Vol. 26 (1990) 5911-14.
- "Positive Temperature Dependence of Yield Stress in Ti-Al-V Compound," S.H. Whang and Y.D. Hahn, Scripta Met. Vol 24 (1990) 485-90.
- "Dissociation of Superdislocations at Yield Stress Peak in Ll o Type Ti-Al-Nb Compound," Y.D. Hahn and S.H. Whang, Scripta Met., vol. 24(1) (1990) 139-144.
- "Dislocation Reaction At 1000 oC in Ti-Al-Nb Compound," S.H. Whang and Y.D. Hahn, Scripta Met., Vol. 24 (September) (1990) 1679-84.
- "Synthesis of Superconducting Bi-Sr-Ca-Cu-O Oxides Via Mechanical Alloying," S.H. Whang and Z.X. Li, Modern Physics Letter B, vol.3, No.8 (1989) 665-672.
- "Precipitation Hardening of Rapidly Quenched Ti-Zr-B Alloys," Y.Z. Lu, S.H. Whang, Mat. Sci. & Eng., 98 (1988) 179-183.
- "Precipitation Hardening of Rapidly Solidified Mo Alloy Containing Boron," Y.T. Ning, S.H. Whang, S.C. Hsu and R.V. Raman, Mat. Sci. & Eng., 98 (1988) 363-367.
- "Microstructures and Mechanical Properties of Ti-5Al-2.9Y and Ti-5Al-7.5Th Alloys," S.H. Whang, Conf. on Rapidly Quenched Metals, Aug. 3-7, 1987, Montreal, Canada, Mat. Sci. & Engrg., 98, (1988) 173-177.
- "Effect of Rapid Solidification on Lattice Parameters and Atomic Ordering in L1 o Type Ti Compound Alloys," D. Vujic, Z.X. Li and S.H. Whang, Met. Trans A, 19A (1988) 2445-2455.
- "Long-Range Ordering in Rapidly Solidified TiAl Compounds," Z.X. Li, Z.C. Li and S.H. Whang, Int. Conf. on Rapidly Quenched Metals, Aug. 3-7, 1987, Mat. Sci. & Engrg., 98 (1988) 162-172.
- "Tetragonal Distortion and Its Relaxation in Rapidly Quenched Ll o TiAl Compounds," S.H. Whang and Z.X. Li, Int. Conf. R.Q.M., Aug. 3-7, 1987, Mat. Sci. & Engrg., 98 (1988) 269-272.
- "Age Hardening of Rapidly Quenched Al-Zr-B Alloys," S.H. Whang, Y.Q. Gao and Y.W. Kim, J. Mat. Sci. 21(8) (1986) 2839-2842.
- "Microstructure and Age Hardening of Rapidly Quenched Ti-Zr-Si Alloys," S.H. Whang, Y.Z. Lu, and Y.W. Kim, J. Mat. Sci. Lett., 4 (1985) 883-887.
- "Crystallization Behavior of Binary Metallic Glasses Containing Pt," Y.Q. Gao and S.H. Whang, Proc. 5th Int. Conf. on Liquid and Amorphous Metals, Los Angeles, 1983, J. Non-Cryst., Vol. 70 (1985) 85-92.
- "Mechanical Chopper for Rapidly Quenched Metallic Ribbon," S.H. Whang, and B.C. Giessen, Materials Letter, 2, No. 33 (1984) 23.
- "Glass Forming Property of Ti-Zr-Si System Determined by Temperature-Composition Map," S.H. Whang, Scripta Met., 18, No. 4 (1984) 309-312.
- "Prediction of Glass Forming Ability for Binary Alloy Systems by Modified T-C Model in Relation to Phase Diagram," S.H. Whang, Proc. 5th Int. Conf. on Liquid and Amorphous Metals, Los Angeles (1983), J. Non-Cryst., Vol. 61 and 62 (1984) 841-846.
- "New Prediction of Glass Formation in Binary Alloys Using Temperature-Composition Map," S.H. Whang, Mat. Sci. and Eng . , 57 (1983) 87.
- "A Technique for the Measurements of Young's Modules of Small Metallic Glass Samples," S.H. Whang, L.T. Kabacoff, D.E. Polk, and B.C. Giessen, J. Mat. Sci., 15A (1980) 247.
- "Formation and Characterization of Amorphous Metals," B.C. Giessen and S.H. Whang, Proc. 4th Int. Conf. on Liquid and Amorphous Metals, (LAM4), Grenoble, France, Journal de Physique - Colloque C-8, 41, C8-95 (1980).
- "Measurement of Young's Modulus of Small Samples of Amorphous Metals Using the Impulse Induced Resonance Technique," S.H. Whang, L.T. Kabacoff, D.E. Polk, and B.C. Giessen, Met. Trans . 10A (1979) 1789.
- "Rapidly Solidified Ti Alloys Containing Novel Additives," S.H. Whang, J. Metals 36 (1984) 36-40.
- "Rapidly Solidified Ti Alloys for High Temperature Applications," S.H. Whang, J. Mat. Sci., 21(7) (1986) 2224-2238.
Other Publications
Patents
- "Precipitate Hardened Titanium Alloy Composition and Method of Manufacture via Rapid Solidification," S.H. Whang, U.S. Patent No. 4,512,826, April 1985.
- "Cold Hearth Melt Spinning Apparatus for Providing Continuous Casting of Refractory and Reactive Alloys," S.H. Whang, U.S. Patent No. 4,612,973, September 23, 1986.
- "High Strength, Ductile, Dispersion Hardened Tungsten Rich Alloys," S.H. Whang, U.S. Patent 4,908,182, March 1990.
- "Ductile, Single Phase - Continuous Superconducting Oxide Conductors," S.H. Whang. U.S. Patent, Feb. 27, 1989, U.S. Patent No. 4,968,663, Nov. 6, 1990.
Other Publications
- "Temperature and Composition Dependence Deformation in g -Titanium Aluminides" S.H. Whang, in Proc. NATO Advanced Research Workshop on OrderedIntermetallics-Physical Metallurgy and Mechanical behavior, pp. 279-298(June 23-28, 1991, in Irsee, Germany), Ed. C.T. Lu, R.W. Cahn and G. Sauthoff, Kluwer Academic Publishers (1992).
- "Dislocation Structure and Planar Defect Energies in L1 o Type Titanium Aluminides" S.H. Whang, Y.D. Hahn, Z.X. Li, and Z.C. Li, Proc. Sym. Intermetallic Compounds, June 17-20, 1991, Sendai, Japan, Japan Institute of Metals, pp. 763-770 (1991).
- “Orientation Dependent Strength and Cross-slip Structure of Ordinary Dislocations in Single Crystal g- Ti-56Al,” Accepted in MRS Proc. on High Temperature Ordered Intermetallic Compound, Nov. 1998.
- "Deformation Mechanisms and Anomalous Hardening at High Temperature in gamma Titanium Aluminides," S.H. Whang, Q. Feng, and Wang, Z.M., Proc. of 7 th Int. Conf. on “Creep and Fracture of Engrg. Mat. & Structure,” ed. J.C. Earthman and F.A. Mohamed, August 10-15, 1997, University of California-Irvine, TMC Inc., (1997) 319-328.
- "Deformation in g -Titanium Aluminides" (Invited Paper) S.H. Whang, Z.M. Wang and Z.X. Li, Proceedings on Gamma Titanium Aluminides, TMS Annual Meeting, Feb. 12-16, 1995, Las Vegas, NV, Eds. Y.-W. Kim, R. Wagner and Yamaguchi, (October 1995) pp. 245-258.
- "Temperature and Composition Dependence Deformation in g -Titanium Aluminides" S.H. Whang, in Proc. NATO Advanced Research Workshop on OrderedIntermetallics-Physical Metallurgy and Mechanical behavior, pp. 279-298(June 23-28, 1991, in Irsee, Germany), Ed. C.T. Lu, R.W. Cahn and G. Sauthoff, Kluwer Academic Publishers (1992).
- "Dislocation Structure in Single Crystal L1 o Type Ti-Al-V Compound," Y.D. Hahn, S.H. Whang & T. Kawabata, MRS Sym., Nov. 26-Dec. 1, 1990, MRS Proc. High Temp. Ordered Intermetallic Alloys, Vol 213, 291-296 (1991).
- "Dislocation Structure and Planar Defect Energies in L1 o Type Titanium Aluminides" S.H. Whang, Y.D. Hahn, Z.X. Li, and Z.C. Li, Proc. Sym. Intermetallic Compounds, June 17-20, 1991, Sendai, Japan, Japan Institute of Metals, pp. 763-770 (1991).
- "Dislocation Structure in L1 o Type Titanium Aluminides," S.H. Whang, and Y.D. Hahn, Proc. International Symposium on High Temperature Aluminides and Intermetallics, Eds., pp. 91-110, S.H. Whang, C.T. Liu, D.P. Pope, and J.O. Stiegler, TMS Inc (1990).
- "Fabrication of Double-Layered Ribbons From Cuprate Superconductor and Silver Melt Spinning," S.H. Whang, D.X. Pang and Z.X. Li, Proc. Sym. High Temperature Superconducting Compounds II, pp. 471-82, S.H. Whang, A. DasGupta and R. Laibowitz, TMS Inc, September (1990).
- "Microstructural Study on Superconducting Composites: Mn-Sn/Cu-Sn and V-Ga/Cu-Ga Processed by Rapidly Solidified Precursor Materials," P.K. Roy, S.H. Whang, S. Karmarkar and D. Divecha, Int. MRS conf., June 10, 1988, Tokyo, Japan, published, Spring 1989.
- "Deformation Structure in Ll TiAl-Nb Compound," Y.D. Hahn and S,H Whang, MRS Sym. Proc. vol. 133, C.T. Liu et al Eds., pp. 385-390 (1989). * "Processing of Superconducting Bi-Sr-Ca-Cu-O Oxides Via Mechanical Alloying," Z.X. Li and S.H.Whang, Proceedings TMS Symposium on Superconductivity, S.H. Whang and A. DasGupta Eds., pp. 237-247, TMS Inc (1989).
- "Fabrication and Properties of Superconducting Yb-Ba-Cu-O Ribbon Prepared by Melt Spinning Technique," K.H. Shin, S.H. Whang, S. Karmarkar and D. Divecha, Proc Symposium on Superconductivity, S.H. Whang, and A. DasGupta eds, pp. 495-502, TMS Inc (1989).
- "Deformation Structure in Ti-Al-V Compound Alloy," S.H. Whang and Y.D. Hahn, MRS Sym. Proc. vol 133, C.T. Liu et al eds, pp. 687-692 (1988).
- "Effect of Silicon Additive on Microstructure of Tungsten Alloys," S.H. Whang, S.U. Kim and D. Kapoor, in Modern Developments in Powder Metallurgy, Vol. 19, pp. 105-119 (1988).
- "Microstructure and Phase Transformation in Tungsten Alloys Containing Aluminum and Germanium," D. Vujic, S.H. Whang and D. Kapoor, in Modern Developments in Powder Metallurgy, Vol. 19, pp. 121-137 (1988).
- "Microstructures of Rapidly Solidified W-Ni Alloys," D. Vujic, S.H. Whang and S. Cytron, Materials Research Society, Symposia Proceedings, Vol. 80, 307-315 (1987).
- "Effect of Rapid Solidification in L1 o Type TiAl Compound Alloys," S.H. Whang, D. Vujic and Z.X. Li, Symposium on Rapidly Solidified Materials sponsored by the American Society for Metals, Orlando, FL, Oct. 5-9, 1986, F.H. Froes and S.J. Savage Eds., 191-198 (1987).
- "Fabrication and Microstructural Study of Superconducting Nb and V Base Alloys," M.W. Park, S.H. Whang, S.D. Karmarkar and Dave Divecha, Materials Research Society, Symposia Proceedings, Vol. 80, 285-291 (1987).
- "Second Phase Coarsening on Ti-5Sn-4.5La Systems," Y.Z. Lu, C.S. Chi and S.H. Whang, Proc. Fifth Rapidly Quenched Metals, S. Steeb and H. Warlimont, Eds., Elsevier Science Publishers B.V., 949-952 (1985).
- "Pilot Scale Arc Plasma Melt Spinning Process for Ti Rich Alloys," : S.H. Whang, C.S. Chi and Y.Z. Lu, Ibid, 115-118 (1985).
- "A Study on Microstructures and Hot Hardness of Consolidated Alloys: Ti-5Al-5.4Er and Ti-5Al-4.5La," C.S. Chi and S.H. Whang, Sym. on Rapidly Solidified Materials, Mechanical Behavior of Rapidly Solidified Materials AIME Inc., PA, pp. 231-245 (1986).
- Formation of Metastable Phases in Rapidly Solidified Binary Ti Alloys," S.H. Whang, and C.S. Chi, Proc. Mat. Res. Soc., 1985, Proc. Mat. Res. Soc., Vol. 58, B.C. Giessen, D.E. Polk and A.I. Taub Eds., 377-382 (1986).
- "Occurrence of Metastable Phases in Binary Ti Rich Alloys Quenched From the Melt," Proceedings of Sym. on Undercooled Alloy Phase, E.W. Collings and C.C. Koch, Eds., The Metallurgical Society Inc., 163-186 (1986).
- "Particle Coarsening of Yttrium Dispersoids in the Phase of Ti-5Sn-3Y system," Y.D. Hahn and S.H. Whang, submitted to Proceedings of Sym. on Rapid Solidification Technology for Titanium Alloys, F.H. Froes and D. Eylon, Eds., The Metallurgical Society Inc., 201-210 (1986).
- "Arc Melt Spin Process For Reactive and Refractory Alloys," S.H. Whang, American Society for Metals Conference, Proceedings on Rapidly Solidified Materials, San Diego, CA, Feb. 3-5, 1985, Ed. P.W. Lee and R.S. Carbonara, pp. 101-106 (1985).
- "Ostwald Ripening in Rapidly Solidified Ti Alloys Containing Y, La, and Er," Y.Z. Lu and S.H. Whang, Ibid, 353-358 (1985).
- "Rapidly Solidified Ti Alloys Containing Metalloids and Rare Metals-Their Microstructures and Mechanical Properties," C.S. Chi and S.H. Whang, Proc. MRS Symposium, 28, 353-340 (1984).
- "Thermal Stability of Precipitates in Rapidly Quenched Ti-Al-Si Alloys," S.H. Whang, Y.Z. Lu, and B.C. Giessen, Proc. MRS Symposium 28, 367-373 (1984).
- "Effects of Novel Additions (Ce, B) on the Microstructure and Mechanical Properties in RS Ti Alloys," C.S. Chi and S.H. Whang, paper presented at AIME Symposium on High Temperature Titanium Alloys, Philadelphia (Oct. 1983), AIME Paper Selection F83-14.
- "Metallic Glass Formation Diagram," B.C. Giessen and S.H. Whang, MRS Symposia Proc., Alloy Phase Diagrams, 19, L.H. Bennett, T.B. Massalski, and B.C. Giessen, Eds., 289-29 (1983).
- "Aging Behavior of Devitrified Ti Rich Alloys Containing Metalloids," S.H. Whang and Y.Z. Lu, Proc. 3rd Int. Conf. on RSP, NBS, Washington, DC, 286-290 (1982).
- "An Arc Furnace Melt Spinner for RSR Processing of Refractory and Reactive Alloy," S.H. Whang and B.C. Giessen, Proc. 3rd Int. Conf. On RSP, NBS, Washington, DC, 435-483 (1982).
- "Preparation of Glassy Metals as Powders via Hydrogen Embrittlement," B.C. Giessen, S.H. Whang and F. Dabkowski, Proc. 3rd Int. Conf. on RSP, NBS, Washington, DC 435-483 (1982).
- "The Mechanical Properties of Some Metal-Metalloid Glassy Alloys and Their Dependence on Composition," I.W. Donald, S.H. Whang, H.A. Davies and B.C. Giessen, 4th Int. Conf. on Rapidly Quenched Metals, Sendai, Japan, 2, 1377-1380(1981).
- "Wear Properties of Some Ti Alloy Glasses," S.H. Whang and B.C. Giessen, 4th Int. Conf. on Rapidly Quenched Metals, Sendai, Japan, 2, 1403-1406 (1981).
- "Wear of Transition Metal Rich Glassy Alloy," S.H. Whang and B.C. Giessen, Proc. MRS Annual Meeting, Boston MA, 8, 301-308 (1981).
- "New Nickel Base Amorphous Spray Powders," V. Panchanthan, R. Ray, C.L. Tsai, and S.H. Whang, Proc. MRS Annual Meeting, Boston, MA, 8, 137-140 (1981).
- "The Correlation Between the Young's Modules and Microhardness in Metallic Glasses," S.H. Whang, D.E. Polk, and B.C. Giessen, 4th Int. Conf. on Rapidly Quenched Metals, Sendai, Japan 2, 1365-1368 (1981).
- "Preparation of Metallic Glasses in Thick Ribbon By A Multi-layer Melt Spinning Process," B.C. Giessen, S. Davis, S.H. Whang and B.H. Kear, in Rapid Solidification Processing, Vol. 11, R. Mehrabian, B.H. Kear and M. Cohen Eds., Reston, VA, 237-240 (1980).
Authored + Edited Books
- Nanostructure Metals and Alloys: Processing, Microstructure, Mechanical Properties and Applications, Edited by Sung H. Whang, Woodhead Publishing Ltd., Cambridge, UK (January 2011)
- Proc. Int. Sym. On “Deformation and Microstructure in Intermetallics” Annual TMS Meeting in New Orleans, 12-14 February 2001, Edited by S.H. Whang and P. Hazzledine, Intermetallics Vol. 9 Nos.10-11 (2001) 847-991.
- Proc on Fifth Int. Sym. on High Temperature Intermetallics, held in Vancouver, 16-20 July 2000, edited by C.T. Liu, S.H. Whang, D.P. pope, M. Yamaguchi, and H. Vehoff, Materials Science & Engineering A, 329-331 (2002)1-941.
- Proc on Fourth Int. Sym. on High Temperature Intermetallics, edited by D.P. Pope, C.T. Liu, S.H. Whang, and M. Yamaguchi, published in Mat. Sci. & Eng. A239-240 (1997) 1- 928.
- Proc on Third Int. Sym. on High Temperature Intermetallics, edited by D.P. Pope, C.T. Liu and S.H. Whang, Mat. Sci. & Eng. Vol. A192 and A193, May (1995) 1- 1011.
- Proc on Second Int. Sym. on High Temperature Aluminides and Intermetallics, Sept. 16-19, 1991, Edited by S.H. Whang, D.P. Pope, and C.T. Liu, Mat. Sci. & Eng. Vol. A152 and A153, May (1992) 1- 746.
- Proc. on High Temperature Superconductors III, Edited by S.H. Whang, A. DasGupta and E. Collings, TMS Inc., PA, September (1991) 1- 493.
- Proceedings on High Temperature Superconducting Compounds II: Processing and Superconducting Properties, S.H. Whang, A. DasGupta, and R. Laibowitz, Eds., TMS Inc., Warrendale, PA, September (1990) 1- 511.
- Proceedings on International Symposium on High Temperature Aluminides & Intermetallics, S.H. Whang, C.T. Liu, D. Pope, and J.O. Stiegler, Eds., TMS Inc, Warrendale, PA, June (1990) 1- 593.
- Proceedings on High Temperature Superconducting Compounds: Processing and Related Properties, S.H. Whang and A. DasGupta Eds., TMS, Warrendale, PA, August (1989) 1- 693.